download
INSTALLATION 1. Remove the previously installed brake pedal cover from the foot brake lever. 2. See Figure 1. Obtain the mounting plate (7) from kit. Position the mounting plate over the brake pedal (A) aligning raised area under plate with oval hole in brake pedal. 3. Obtain the offset washer (2) from kit. Position washer under brake pedal and align the “offset” area of the washer so that it covers oval hole in brake pedal. 4. From top of mounting plate, install 5/16 inch flathead screw (1) through mounting plate (7), brake pedal (A) and offset washer (2). 5. From under brake pedal, install acorn nut (3) to secure mounting plate and offset washer to brake pedal. Tighten acorn nut to 25-29 ft-lbs (33-39 Nm). 6. Obtain brake pedal cover (5) and pedal tread (6) from kit. Align and insert tread (6) into the brake pedal cover. 7. From the side, slide the brake pedal cover assembly over the mounting plate (and pedal) and align the two holes in bottom of cover with two holes in mounting plate. 8. Obtain the two 10-24 screws (4) from kit. From under brake pedal (A), install screws through holes in mounting plate (7) and into pedal cover (5). Tighten screws to 20-22 in- lbs (2.2-2.5 Nm)
Incoming search terms:
- goldwing trike rear brakes adjustment
- m109r brake pedal
- M109R Brake Pedal Adjustment
- harley davidson 2006 sportster how to adj rear brakes? with forward controls
- how to adjust brake pedal on foreward control harley softail
- 2002 forward conrtol brake adjustment
- M109R rear Brake Pedal Adjustment
- motorcycle brake padel extsions
- shifter and brake pedal extender for Honda motorcycle
- forward mount brake pedal lever for fld 2012